Files Location — K2 Plus¶

All persistent data on the K2 Plus lives under /mnt/UDISK/. There is no /usr/data/ path on the K2 Plus — this differs from the K1 Series.

Connect via SSH to access these locations.

Klipper & Printer Data¶

Resource	Path
Klipper configuration files	`/mnt/UDISK/printer_data/config/`
GCode files	`/mnt/UDISK/printer_data/gcodes/`
Klipper log	`/mnt/UDISK/printer_data/logs/klippy.log`
Moonraker log	`/mnt/UDISK/printer_data/logs/moonraker.log`
Moonraker database	`/mnt/UDISK/printer_data/`
Moonraker timelapse videos	`/mnt/UDISK/printer_data/timelapse/`

Creality System Data¶

Resource	Path
System config (self-check flag, etc.)	`/mnt/UDISK/creality/userdata/config/system_config.json`
Creality timelapse videos	`/mnt/UDISK/creality/userdata/delay_image/video/`
AI image data	`/mnt/UDISK/ai_image/`
Layer image data	`/mnt/UDISK/layers_image/`

Read-Only System Paths¶

These paths live on a read-only partition and cannot be edited in place. Modifying them requires overlaying or replacing the binary/file via the helper script approach.

Resource	Path
Klipper Python env	`/usr/share/klippy-env/bin/python`
Klipper source	`/usr/share/klipper/klippy/klippy.py`
Klipper config templates	`/usr/share/klipper/config/F008_CR0CN240319C13_1/`
Moonraker Python env	`/usr/share/moonraker-env/bin/python`
Moonraker source	`/usr/share/moonraker/`
Moonraker config	`/usr/share/moonraker/moonraker.conf`
Fluidd static files	`/usr/share/fluidd/`
Nginx config	`/etc/nginx/nginx.conf`

Service Scripts¶

The K2 Plus uses OpenWrt-style rc.d init scripts. There is no systemd or supervisord.

Service	Start script	Stop script
klipper MCU bridge	`/etc/init.d/S54klipper_mcu`	`/etc/rc.d/K54klipper_mcu` (if present)
Klipper (klippy)	`/etc/init.d/S55klipper`	—
Moonraker	`/etc/init.d/S56moonraker`	—
Nginx	`/etc/init.d/S80nginx`	—
WebRTC (camera)	`/etc/init.d/S97webrtc`	`/etc/rc.d/K97webrtc`

To restart a service over SSH:

/etc/init.d/S55klipper restart
/etc/init.d/S56moonraker restart
/etc/init.d/S80nginx restart

No supervisorctl on K2 Plus

Unlike the K1 Series, the K2 Plus does not use Supervisor Lite. The supervisorctl command is not available. Use the rc.d init scripts above instead.