Special Thanks¶
This project would not exist without the work of many talented developers and the open source community.
Guilouz — Original Creality Helper Script Wiki¶
Guilouz created the original Creality Helper Script Wiki for K1 Series printers. This project is a fork and complete rewrite for the K2 Plus architecture.
DnG-Crafts — K2 Camera Fix¶
DnG-Crafts discovered and documented the K2 Plus camera WebRTC signaling protocol and created the original HTML-based camera workaround for Fluidd. Their work made it possible to reverse-engineer the custom base64 JSON WebRTC format used by the K2 Plus camera, leading to the full go2rtc integration.
AlexxIT — go2rtc¶
go2rtc by AlexxIT is the stream conversion software that bridges the K2 Plus proprietary WebRTC camera to Fluidd and Mainsail. The ARM hard-float binary runs perfectly on the K2 Plus hardware.
prestonbrown — HelixScreen¶
prestonbrown created HelixScreen, a modern Klipper touchscreen UI with explicit K2 series support including prebuilt armhf binaries and CFS protocol documentation.
Klipper¶
Klipper is the open source 3D printer firmware that powers the K2 Plus. Without Klipper, none of this would be possible.
Moonraker¶
Moonraker is the API server that bridges Klipper with web interfaces like Fluidd and Mainsail.
Fluidd¶
Fluidd is the web interface pre-installed on the K2 Plus on port 4408.
Mainsail¶
Mainsail is an alternative web interface for Klipper, available on port 4409 after installation.
KAMP — Klipper Adaptive Meshing & Purging¶
KAMP by kyleisah enables adaptive bed meshing and purging for Klipper printers.
Material for MkDocs¶
This wiki is built with Material for MkDocs by squidfunk.
Support This Project¶
If you find this wiki and helper script useful, consider supporting the work!
